Part Number
Part Number:
NSN:
NIIN:
Item Name:
FAN , VANEAXIAL
Definition:
A NONPOSITIVE DISPLACEMENT MECHANICAL DEVICE WITH GUIDE VANES AND HAVING AN AXIAL FAN IMPELLER(S) INCLOSED WITHIN A TUBULAR HOUSING. IT IS DESIGNED PRIMARILY FOR DUCT INSTALLATION TO MOVE AIR OR GAS AXIALLY OVER A WIDE RANGE OF VOLUMES AND PRESSURES.
CAGE Information
| Code | Company |
|---|---|
| 09519 | NEW PHILADELPHIA FAN CO BUFFALO FORG |
Federal Supply Class
Title
FANS, AIR CIRCULATORS, AND BLOWE
Inclusions:
INCLUDES WALL TYPE FANS; PEDESTAL TYPE FANS; HOUSEHOLD TYPE AND ATTIC TYPE EXHAUST FANS; FLOOR FANS; FORGED DRAFT EXHAUST AND DISPOSAL KITS; FANS, AIR CIRCULATORS, AND BLOWER EQUIPMENT, WHETHER DESIGNATED AS "INDUSTRIAL" OR "NONINDUSTRIAL" BY APPLICATION AND/OR USE.
Exclusions:
EXCLUDES COMBINATION HEATER-FANS (FSC 4520).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABRY | LENGTH | 19.375 INCHES NOMINAL |
| ABRY | LENGTH | 19.375 INCHES NOMINAL |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| AKNA | INCLOSURE TYPE | FULLY INCLOSED |
| AGAV | END ITEM IDENTIFICATION | ARLEIGH BURKE CLASS DDG; TICONDEROGA CLASS CG (47); NIMITZ CLASS CVN; SPRUANCE CLASS DD (963); OLIVER PERRY CLASS FFG; WASP CLASS LHD; FORRESTAL CLASS CV; VIRGINIA CLASS CGN (41); KIDD CLASS DDG; CHILLER WATER A/C SYSTEM; AND FANS |
| ABMZ | DIAMETER | 12.750 INCHES NOMINAL |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | 65.0 DEG CELSIUS |
| ADNK | FLOW DIRECTION | OUTWARD |
| STYL | STYLE DESIGNATOR | FIXED |
| AKCV | DRIVE TYPE | DIRECT |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE HOUSING |
| NMBR | QUANTITY | 1 |
| AKDJ | PRIME MOVER TYPE | ELECTRIC MOTOR |
| TEST | TEST DATA DOCUMENT | 81349-MILF18953 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| FAAZ | PHASE | THREE |
| CSBH | VOLTAGE IN VOLTS AND CURRENT TYPE | 440.0 AC |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE BLADE |
| AGBD | ELECTRICAL CONNECTION TYPE | TERMINAL BLOCK |
| CWLY | PRIME MOVER DRIVE SHAFT BEARING TYPE | BALL |
| CSYL | PRIME MOVER POWER RATING | 1.000 HORSEPOWER |
| MATT | MATERIAL | ALUMINUM ALLOY BLADE |
| AAYD | STAGE QUANTITY | 1 |
| AYSY | ROTATION DIRECTION FOR WHICH DESIGNED | CLOCKWISE |
| CWLX | HOUSING INSIDE DIAMETER | 14.750 INCHES NOMINAL |
| ABBB | SPEED ADJUSTMENTS | SINGLE SPEED |
| AEQC | OPERATING SPEED AT RATED CAPACITY IN RPM | 3450.0 |
| MATT | MATERIAL | ALUMINUM ALLOY HOUSING |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 1 FLANGE |